Mike Lambert (our Engineering and Operations Director) and myself, Martin Stevens (Sales and Business Development Manager) recently spent a week […]
EcoMechanica, our Greek distribution partner, recently attended the Energy Efficiency in Buildings Conference in Athens. The event gathers professionals from […]
powerPerfector does Europe! Tanya, our Commercial Director and Michael, our Engineering Director, recently crossed the Channel to offer support to […]
powerPerfector continues to expand to meet the growing demand for our energy-saving units and it’s an absolute pleasure to welcome […]
A powerPerfector unit is more analogous to a current transformer, or CT. These are used on a small scale for […]
The powerPerfector is not a conventional transformer, illustrated below: Figure 1 – Standard voltage transformer Voltage transformers of this type […]
Three-phase power supplies, as opposed to single phase, provide power at a near-constant level (415V on average). This is important […]
The ‘power factor’ of an electrical supply is the ratio of the ‘real power’ to the ‘apparent power’ of the […]
Transients are large, very brief and potentially destructive increases in voltage. They can be caused by lightning strikes – often [...]
Harmonics are current and voltage waveforms that are at a higher frequency than the 50Hz main supply. They occur at […]
Over-voltage causes equipment lifetimes to be reduced, and increases the energy consumed with no improvement in performance. Most load types […]
Electrical equipment that has a poor quality power supply will operate with reduced efficiency, causing energy to be wasted, and […]
There has never been a greater need for our energy saving green box and the buzz is back! In fact, […]
Novotel London Bridge, located south of the River Thames, is a busy 182-room hotel with modern facilities. Part of the […]
Standard contact form with newsletter subscription